View AML150PS20_4559087.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AC-DC
150 Watts AML150 Series
* * * * * * * High Power Density
xppower.com
Single Outputs from 12 V to 24 V Universal Input High Efficiency 0 C to +70 C Operating Temperature Non-standard Connectors Available International Safety Approvals
Specification
Input
Input Voltage Input Frequency Input Current * 90-264 VAC * 47-63 Hz * 2.0 A rms at 115 VAC, 1.0 A rms at 230 VAC Inrush Current * 60 A at 115 VAC, 120 A at 230 VAC, cold start +25 C Power Factor * 0.95 typical Earth Leakage Current * 150 A max at 115 VAC, 250 A max at 230 VAC Input Protection * Internal 4 A fuse Standby Power * <1 W Consumption
General
Efficiency Isolation * 88% min * 3000 VAC Input to Output 1500 VAC Input to Ground Output 0 V is electrically connected to Input Ground * 20-80 kHz variable * 5.1 W/In3 * >100 kHrs per MIL-HDBK-217F (+25 C ambient at full load)
Switching Frequency Power Density MTBF
Environmental
Operating Temperature * 0 C to +70 C, derate from 100% power at +40 C to 60% power at +70 C Operating Humidity * 10-95% RH, non-condensing Storage Temperature * -20 C to +80 C Operating Altitude * 3000 m Shock * 30 g, 10 ms on 3 axes Vibration * 5-100 Hz, 2.31 m/s2, 20 mins, 3 axes
Output
Output Voltage Output Voltage Trim Initial Set Accuracy Minimum Load Start Up Delay Hold Up Time Line Regulation Load Regulation Transient Response See table Not user-adjustable 2% No minimum load required 5 s max at 100 VAC 3 ms minimum at 100 VAC 0.5% maximum See table 4% max. deviation, recovery to within 1% in 500 s for a 25% load change Ripple & Noise * 2% max pk-pk (see note 1) Overvoltage Protection * 110-140% Vnom, recycle input to reset Overtemperature * Unit shuts down, recycle input to reset Protection Overload Protection * 110-150%, auto recovery Short Circuit Protection * Trip and restart (Hiccup mode) Temperature * 0.04%/C Coefficient * * * * * * * * *
EMC & Safety
Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Dips & Interruptions * EN55022/FCC/VCCI, Class B conducted EN55022/FCC/VCCI, Class B radiated * EN61000-3-2 * EN61000-3-3 * EN61000-4-2, level 2 Perf Criteria A * EN61000-4-3, level 2 Perf Criteria A * EN61000-4-4, level 2 Perf Criteria A * EN61000-4-5, level 3 Perf Criteria A * EN61000-4-6, level 2 Perf Criteria A * EN61000-4-11, 30% for 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B * EN60950, UL60950, CSA22.2 No. 60950 per cUL, CE Mark
Safety Approvals
AC-DC
Models and Ratings
Output Power 150 W 150 W 150 W 150 W 150 W Notes
1. Ripple and noise measured at 20 MHz bandwidth with a 47 F tantalum and 0.1 F ceramic cap connected at the measurement point. 2. Total regulation includes initial set accuracy, line and load regulation. Available from Farnell. See pages 204-206. ^ Available from Newark. See page 207-208.
AML150
Output Voltage 12 V 15 V 19 V 20 V 24 V Output Current 12.50 A 10.00 A 7.89 A 7.50 A 6.25 A Total Regulation(2) 5% 5% 5% 5% 5% Model Number AML150PS12^ AML150PS15^ AML150PS19^ AML150PS20^ AML150PS24^
Mechanical Details
Cable length approx 70.9" 1.97" (1800mm 50mm) (4)
13 2 4
1.57 (40.0) Power On Indicator
Rubber foot (4 places.)
Pin 1 2 3 4 Shell
Function Output + Output + Return/Input Earth Return/Input Earth Return/Input Earth
2.83 (72.0)
0.02 (0.5)
AC Input IEC 320/C14 Inlet
Notes 1. Dimensions shown in inches (mm). Tolerance is 0.02 (0.5) maximum, except output cable length. 2. Weight: 1.76 lb (800 g). 3. Optional output connectors available. Consult sales. 4. AML150PS12 cable length is 37.4" (950 mm). 5. Output connector (Kycon KPP-4P or equivalent) mates with Kycon KPJ-4S or equivalent.
6.73 (171.0)
17-Apr-07

▲Up To Search▲

Price & Availability of AML150PS20

	To Download AML150PS20 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .